Slip Coat Plus

Slip Coat Plus is specially formulated to fill the minute pores in paintwork and leave a dense temporary water resistant film on cargo hold surfaces.

• Product metal against corrosive cargo
• Products paint against cargo penetration
• Environmentally friendly
• Safe to  use in occupied / covered areas
• Reduces turn around times
• Easy to direct spray
• If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
• Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective  equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
• And don’t forget procedures  have to be drown up and your
• Crew  trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time

Polymer based Hold coating product, Easy to apply on SHIP HOLD SURFACE.  Slip Barrier Coats HOLD BLOCK is POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Dosage

RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels, which carry corrosive and/or messy cargos such as sulfur salt petcock coal, and concentrates. It can be easily removed with itRecommendation Dose for smooth surface : 

for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This material can be used directly with low-pressure machine or manually by a garden spray pump. in general practice on smooth & clean surface each drum of 210 ltrs cover 2000 to 2500 sq meters while on rough and rusted surfaces require more quantities of materials.

for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX    (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Precautions

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

SLIPcoat supplier in Sohar Muscat Oman, Fujairah Dubai UAE

What is Hold Block and why hold block application is better than LIME WASH?

When aggressive or corrosive dry bulk cargoes—such as fertilizers, salt, coal, or sulphur—come into direct contact with the metal surfaces of ship holds, they can cause rapid corrosion and surface degradation due to chemical reactions. This not only weakens the structural integrity of the vessel but also leads to costly repairs and safety risks.

To prevent such reactions and ensure long-lasting surface protection, a polymer-based protective coating is the ideal solution.

Why Use Polymer based HOLD BLOCK Coating in Cargo Holds?

• Chemical Resistance
  Acts as a barrier against corrosive cargoes, preventing direct metal contact and chemical reaction.

• Easy Application
  Applied by brush, roller, or spray before cargo loading. Forms a durable, even protective film.

• Temporary or Voyage-Specific Use
  Perfect for short-term voyages carrying highly reactive cargoes, allowing for easy cleaning and reapplication after discharge.

• Prevents Pitting & Rust Formation
  Shields steel from moisture, acidic residues, and abrasion, reducing long-term maintenance costs.

Field and Typical Applications of HOLD BLOCK

• Sulphur

• Salt

• Phosphates

• Urea

• Coal & Petcoke

• Cement

• Bauxite

Why Hold Block is better choice than LIME COATING

• Polymer-based water-resistant coating

• Safe on all standard marine metal surfaces

• Compatible with hold cleaning chemicals

• Non-reactive, non-toxic, and easy to remove

• Protects for the entire duration of cargo voyage

Recommended Use of Cargo Hold Block 

Apply 1–2 coats uniformly across cargo hold surfaces prior to loading reactive cargo. For enhanced protection, focus on:

• Tank tops

• Bulkheads

• Frames and internal structures

• Hatch coamings

Cargo Hold Block Available Across Indian UAE Oman coastal:

• UAE: Dubai, Fujairah, Abu Dhabi, Sharjah, Khor Fakkan

• Oman: Muscat, Sohar, Duqm, Salalah

• India: Mumbai, Kandla Mundra Jamnagar Sikka, Kolkata Haldia Paradip, Visakhapatnam, Chennai Manglore

Useful area

Slip Barrier Polymer Coats HOLD BLOCK formulated to perform maximum protection to wards hold surface during transport and save lot of time during unloading operations as cargo doesn't adhere towards hold surface. After unloading of cargo when RXSOL ALKALINE DETRERGENT is applied to Slip Barrier Polymer Coat treated hold surface all cargo residue get off without any extra manual force requirement.

#SLIPcoat_supplier
#HOLDblock_manufacturer

Supply location

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly .
$ Safe to use in occupied / covered areas.
$ Reduces turn around times .
$ Easy to Direct Spray.

Other Important materials , which help to control corrosion on metal surface. Chemically SULPHUR producing STRONG acid in presence of  moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and usingprocedure.

RXSOL Bilge Coat (Sulphur Acid Neutralizer)  Acts as Acid Neutralizer formed during sulphur voyages. 

Keywords

Hold Block, Slip Barrier Coats HOLD BLOCK, Preload 

Refer link for HOLD CLEANING APPLICATOR KIT : http://rxmarine.com/Ship-Cargo-Hold-Cleaning-and-applicator-Kit-supplier-India-Middleeast-Dubai