SEA VOYAGE CLEAN Plus

SEA VOYAGE CLEAN Plus Plus Tank Plus Specially formulated for cleaning of double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of deck and engine rooms.  Its strong emulsifying nature completely makes fuel oils miscible with water due to that It's application field increases as strong cleaner for BOILERS, MARINE DIESEL ENGINE COOLING WATER SYSTEM  and for local cleaning and degreasing of engine rooms  on deck. This product is also popular used on oil installations, workshops, plant yards, industrial plants as degreaser and cleaner

RXSOL-20-2027-025 is an effective  liquid blend of  modern low toxic, biodegradable solvent, concentrated emulsifier with penetrating agents, mild abrasives and wetting agents which makes this an excellent  liquid scouring cleansers  for cleaning and degreasing action which makes useful for Cargo tank cleaning after drying, semi-drying. And non-drying natural oils and fats. Saponifying and detergents.

Similar familly group of this product is Tank cleaner Plus, Clear break, SEA VOYAGE CLEAN Plus Tank Plus, Tank Cleaner. 

SEA VOYAGE CLEAN Plus is Highly effective concentrated cleaner .
Versatile, can be used for a wide application range ( for TANK or general cleaning .)
Provides quick and thorough emulsifying action.
Can be used for cleaning , gas freeing of double bottom, deep and other fuel oil bunker tanks.
May also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.
It can be used as a general purpose cleaner to remove oil and grease deposits  and cleaning of bilge spaces and engine rooms from soiled surfaces. Can be used for degreasing and cleaning engine cooling water systems
 

Areas of Application

Dosage

Directions for Use and Dose Rates

RXSOL-20-2027-210 VOYAGE TANKCLEAN Plus is  specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.

Soak Method

for heavy soil put parts into undiluted RXSOL-20-2027-210, for general soiling use a solution of 10-30% RXSOL-20-2027-210 in water. Parts should be soaked for at least 30 minutes before washing off with water.

Direct Injection Method for Cargo Tanks

Undiluted SEA VOYAGE CLEAN Plus should be injected at a predetermined rate into the pressure side of the automatic tank cleaning system line on deck using an air-operated drum pump. An injection rate of 0.1–0.2% SEA VOYAGE CLEAN Plus is normally sufficient. Typical cleaning time is 2–6 hours, after which the tank should be rinsed with water.

Recirculation Method

A chemical solution is prepared in one of the aft tanks near the pump room and circulated via the automatic tank washing system pump and heater to the tank being cleaned. The solution is returned to the chemical solution tank through the stripping line. In most cases, recirculating the solution through the tank washing system heater to maintain temperature is not possible without establishing a temporary connection between the chemical solution tank and the tank washing pump.

The capacities of the solution tank, pipelines, and pumps must be carefully calculated to ensure sufficient volume for continuous recirculation. Depending on tank size, condition, and solution quantity, up to three tanks can typically be cleaned using one solution. For additional tanks, a fresh solution must be prepared. SEA VOYAGE CLEAN Plus is circulated at a concentration of 2–6% in seawater.

After chemical cleaning, tanks should be thoroughly rinsed with seawater or fresh water, depending on availability and operational requirements.

Spraying Method

Use neat RXSOL-20-2027-210 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation  for stubborn deposits.

Rock and Roll Method (for Double Bottom Tanks)

Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1) First of all  heat the remaining oil in tanks .
2)By stripping constantly. flush the tank with sea water, 
3) Close  all suction and discharge valves .
4) 1^st  Dose  Fill the tanks by ½ to 1 litre RXSOL-20-2027-210 per tone of     water   through pipe or manhole , for  75-80% of capacity of tank to be cleaned.
5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9) For completion add second dose of RXSOL-20-2027-210, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.

Notes

SEA VOYAGE CLEAN Plus is a highly concentrated, performance-driven formulation comprising selected aromatic solvents, advanced emulsifiers, and a balanced system of non-ionic and anionic surfactants. It is specifically engineered for the effective removal of heavy crude oil, soot, asphalt, and carbon black deposits from a wide range of surfaces.

The product delivers rapid penetration and emulsification of stubborn hydrocarbon-based contaminants, enabling efficient cleaning with reduced mechanical effort. SEA VOYAGE CLEAN Plus is suitable for application through direct injection using the Voyage Method, as well as by spraying and closed-loop or open-system recirculation. Its versatile application profile makes it ideal for marine, industrial, and heavy-duty cleaning operations where high contamination levels are encountered.

Precautions

DOSAGE of SEA VOYAGE CLEAN Plus

Direct Injection: 0.1 - 0.2 %

Recirculation: 2 - 6 %

Hand spraying: undiluted

Rock and Roll Method: See below table

More or less can be used than what is specified. Dosage directly depends on strength of cleaning required.

Supply location

SEA VOYAGE TANKCLEAN Plus manufacturer and supplier in Mumbai, Kandla Gandhidham, Kolkata, Chennai, Chennai Ennore, Visakhapatnam Gangavaram, Fujairah, Ajman, Abudhabi, Sharjah, Muscat Oman, Canada, Nairobi Kenya Mombasa, Africa

Generic name

Keywords

VOYAGE TANKCLEAN Plus is Tank cleaning chemicals based on oil based proprietory emulsifier.