RXSOL 14 (Heat & Water Scale Remover)
MSDS not yet available online for this product — email us at office@rx-sol.com and we'll send you a copy.
RXSOL 14 is a blend of mineral acid, surfactants and inhibitors. RXSOL 14 will remove rust, heat treatment scale and welding scale from ferrous metals simply and economically. Before operating the process described it is important that this complete document, together with any relevant Safety Data sheets, be read and understood.
Key facts
- Product
- RXSOL 14 (Heat & Water Scale Remover)
- Part No.
- RXSOL-18-1810-025
- Category
- Railway Cleaning
- Brand
- RXSOL · Chemical Pioneers since 1995
- Supply
- From stock in Oman, UAE and India; to vessels in Gulf and Indian ports
- Documents
- MSDS and TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 7733 3599
Appearance: Pale straw coloured liquid.
Density: 1.1 g/ml at 200C.
Flash point: Non-flammable.
These are typical values only and do not constitute a specification.
Store under normal conditions with the containers tightly closed.
Immersion Type Heat & water scale remover.
Testing chemicals required
Indicator solution :phenolphthalein
Testing solution : 0.1N sodium hydroxide solution
Method of control
Restore the volume of the tank to its original level, if necessary, by adding water. Thoroughly mix and take a sample of 50-100ml. After allowing to cool to ambient, pipette 25ml into a 250ml volumetric flask. Make up to the mark with distilled water. Pipette 10ml of this solution into an Erlenmeyer flask and add 5-10 drops of Indicator solution No.1. Titrate against Testing solution No.1 to a pink end-point. Record the volume used as (V).The bath strength is calculated as follows:
Strength (vol% ARDROX 14) = V x 1.4
Effects on materials
RXSOL 14 is inhibited against attack on steel. It will rapidly attack aluminium, zinc, magnesium and cadmium.
Dosage
Where heavy rust and scale are to be removed, RXSOL 14 may be used as supplied. Usually concentrations ranging from 3 parts RXSOL 14 plus 17 parts water to 1 part RXSOL 14 plus 1 part water are adequate. (Parts indicated to be by volume).
The preferred operating temperature is 20 - 30°C. Temperatures in excess of 50°C should not be used.
Components to be treated should be degreased, if necessary, before being immersed in RXSOL 14. Fume extraction is required over tanks of RXSOL14. After treatment in RXSOL14, components should be thoroughly rinsed and de-watering fluid such as RXSOL 1854 applied to give protection from corrosion.
Supply Locations
RXSOL 14 (Heat & Water Scale Remover) manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of RXSOL 14 (Heat & Water Scale Remover) at a competitive price from us. We have ready stock of RXSOL 14 (Heat & Water Scale Remover) in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.