RXFLOC 10

Anionic Polyacrylamide Flocculant

Anionic Polyacrylamide Flocculant is an medium anionic charged polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.

Properties : 

It is used for effluent treatment of inorganic suspended solids found in chemical, Fishery, food, textile, dye, other effluent water, mining and coal washing waste water, metal processing, etc.

Paper Pharmaceutical Industrial medicine Textile Industry Plastic Fertilizer Water Treatment Toothpastes Nuclear Paints Lubricants Metal Oil Industry Rubber Organic Synthesis Printing Industry.

Other application and benefits of RXFLOC 10

• Highly effective across a wide range of applications including mechanical dewatering, thickening, flotation, and clarification.
• Operation over a wide pH range (4–9)

Dosage

The dosage range of Anionic Polyacrylamide Flocculant  Anionic Polyelectrolyte Powder varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of Anionic Polyacrylamide Flocculant  Anionic Polyelectrolyte Powder.

Jar Test: Put sample of effluent in a beaker and add Anionic Polyacrylamide Flocculant Powder as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.

Procedure and precautions upon dispersion and dissolving flocculants:-

Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration, and then dilute the flocculant mixture immediately before use.

Useful Area

Industrial Usage

Remarks

Anionic Polyelectrolyte is white colored free-flowing powder which is widely used in food processing, chemical, petrochemical, and dairy industries. It can also be used for destabilizing colloidal suspension by inducing flocculation and precipitation. This polyelectrolyte is required for stabilizing solutions and to impart desired characteristics. It is most commonly used for enhancing efficiency of filtration and clarification processing of sugar. The product offered by us is compatible to be used for any pH conditions which make it suitable for paper making and wastewater and drinking water treatment industries. It is known to have ability to settle inorganic suspended solids.

VISCOSITY AT 25 DEGREE CELCIUS

Supply Locations

Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Gulf, Yemen,UAE Middle East, Ruwi, Ghala, Muscat Barka Oman, Nairobi Kenya Africa, Mumbai, Kandla, Kolkata, Vishakhapatnam, Chennai, India, Canada, Nairobi Kenya, Sudan