Multi Clean TANK WASH
For the latest, most accurate MSDS, email us at office@rx-sol.com.
Multi Clean TANK WASH (Part No. RXSOL-16-1502-210) is supplied by RXSOL as part of our Tank Cleaners range. Supplied from RXSOL stock in Oman, the UAE and India, and to vessels in Gulf and Indian ports. Contact us for price, pack size, lead time, MSDS and technical data sheet.
Multiclean supplier and Exporter. Multi clean is a specified tank cleaner which has mild alkaline emulsifier cleaning property.
Key facts
- Product
- Multi Clean TANK WASH
- Part No.
- RXSOL-16-1502-210
- Category
- Tank Cleaners
- Brand
- RXSOL · Chemical Pioneers since 1995
- Supply
- From stock in Oman, UAE and India; to vessels in Gulf and Indian ports
- Documents
- MSDS (PDF); TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 7733 3599
Boilling Point : 100 Degree C
Solubility in Water : Completely Soluble in Water
Use at a concentration of 2% to 5%. Add 20 ml. RXSOL-16-1502-210 to 1 litre of hand-hot water. for SPOT CLEANING purpose.
Use 1.5% solution of RXSOL-16-1502-210 in a bucket of water. for general cleaning . No rinsing needed.
Use a 1% solution of RXSOL-16-1502-210 for SPRAY CLEANING
Use 0.2% solution of RXSOL-16-1502-210 For general cleaning where HOT cleaning required
Dosage
Using-Procedure:-
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:- Spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
**Make sure to take all safety precautions are followed when handling / spraying as other GENERAL TANK CLEANER **
Injection Method:- Not applicable.
Re- Circulation Method:- Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and MULT CLEAN to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
**Use a strainer at the pump stack when circulating any solution.** Tank Lining– Stainless / Epoxy / Phenolic.
Useful Area
Multi clean used as a tank cleaner degreaser and also common for ship hold cleaning.
Industrial Usage
Bulletin Details
Description :::
Application Method :::
DOSE :::
Technical Specification :::
Remarks
While this product in non-toxic, non-corrosive and non-poisonous,it is nevertheless wise to keep it out ot reach of childrean,and to follow basic precautions of use. Wash hands with warm, soapy water after use. Avoid contact with eyes,open cuts or sores.In case of eye contact, flush with water for 15 minutes. Call a physician. Do not use this container for storing beverages or other liquids. Contains BioActive formulation contains no phosphorus
Supply Locations
Multiclean supplier for shipping Industries. We are Multi Clean Tank Cleaning detergent supplier in Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Sohar, Muscat Barka Ruwi Ghala Oman and Mumbai, Gandhidham Kandla Mundra, Hazira, JNPT Nhava Seva, Chennai Ennore, Visakhapatnam, Gangavaram, Kolkata Haldia, Paradip, Kenya MOmbasa Nairobi, Uganada, Canada, Sudan, Yemen