Metal Brite
Part No. RXSOL-25-1011-010
Rust and Metal Tarnish Remover Specially designed for removal of rust from any steel surface area also acts as rust proofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
For the latest, most accurate MSDS, email us at office@rx-sol.com.
Metal Brite (Part No. RXSOL-25-1011-010) is supplied by RXSOL as part of our Deck, Cabin & Galley Cleaners range. Supplied from RXSOL stock in Oman, the UAE and India, and to vessels in Gulf and Indian ports. It is also known as Metal Brite 25 Ltr, Metalbrite, Part No.651 571679, Sea Shield Nalfleet 79112. Contact us for price, pack size, lead time, MSDS and technical data sheet.
Key facts
- Product
- Metal Brite
- Part No.
- RXSOL-25-1011-010
- Category
- Deck, Cabin & Galley Cleaners
- Also known as
- Metal Brite 25 Ltr, Metalbrite, Part No.651 571679, Sea Shield Nalfleet 79112
- Brand
- RXSOL · Chemical Pioneers since 1995
- Supply
- From stock in Oman, UAE and India; to vessels in Gulf and Indian ports
- Documents
- MSDS (PDF); TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 7733 3599
Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing.
Before application of Metal Clean Britte, we have to understand its cleaning principal...
In general terms and thumb rule for Metals Britte is MORE RUST required more Metals Britte. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
2nd factor is the time which is directly affecting the cleaning result. If base metal is Aluminium then use Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30% of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.
The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)
Dosage
Notes
Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing.
Before application of Metal Clean Britte, we have to understand its cleaning principal...
In general terms and thumb rule for Metals Britte is MORE RUST required more Metals Britte. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
2nd factor is the time which is directly affecting the cleaning result. If base metal is Aluminium then use Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30% of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.
The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)