FILM Cleaner (TR-TA) Blue
MSDS not yet available online for this product — email us at office@rx-sol.com and we'll send you a copy.
A unique detergent cleaner designed for easy cleaning all surfaces. Works well in hard water conditions. Especially suited for removal of grime, stains from tank linings soap scum and mineral deposits. Makes SURFACE sparkle. A modern combination of synthetic detergents for multipurpose cleaning of any surface not harmed by water.
Key facts
- Product
- FILM Cleaner (TR-TA) Blue
- Part No.
- RXSOL-16-1200-025
- Category
- Vehicle & Workshop Cleaners
- Brand
- RXSOL · Chemical Pioneers since 1995
- Supply
- From stock in Oman, UAE and India; to vessels in Gulf and Indian ports
- Documents
- MSDS and TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 7733 3599
PROPERTIES
| Appereance | Clear Blue Liquid |
| pH | Alkaline |
| Boiling Point | 100°C |
| Flash Point | NA |
| Specific Gravity | 1.05-1.115@20°C |
| Solublility in water | 100 % |
| Biodegradable | Yes |
CIRCULATION METHOD
Tankcleaning product especially for zinc-silicate coatings. It can be used to remove light oil and greasy contaminations like hydrocarbons, alcohols etc
Dosage
Recommended tank-cleaning procedure for removing stains from tank linings using RXSOL FILM Cleaner (TR-TA) Blue.
1. Mix solutions of RXSOL FILM Cleaner (TR-TA) Blue either in tank bottom or void space.
2. Dilution rate with water between 0.1 % and 2 % at the spray head (10 % in the metering tank). When dealing with stubborn dirt, it is recommended to spray with a higher concentration of RXSOL FILM Cleaner (TR-TA) Blue to a maximum of 10 % at the spray head.
3. Do not use the entire quantity of RXSOL FILM Cleaner (TR-TA) Blue in one solution for all tanks to be cleaned. Save a few drums (2 - 3) to “boost” the solution for cleaning the last 20 % - 25 % of the tanks to be cleaned.
4. The solution may be used at ambient temperature, however, it is suggested that an increase of the cleaning temperature to maximum 80 °C will enhance the cleaning ability and shorten the cleaning time.
5. Proceed to recycle the cleaning solution through the tankwashing system for a period of two hours minimum
per machine drop. Usually a cleaning time of 4 hours per
tank will prove sufficient.
6. At completion of chemical application begin washing down with water, using maximum pressure available.
7. Inspect tank surfaces and if there remain some stains, spot clean with undiluted RXSOL FILM Cleaner (TR-TA) Blue directly on the stained area. Allow a reaction time of 30 minutes and then rinse with water. General cleaning without high pressure equipment: DiluteRXSOL FILM Cleaner (TR-TA) Blue depending on the type and amount of contamination with cold or hot water 1:3 till 1:200 (maximum10% solution). Clean with the aid of a bristle, a sponge or clothes. Rinse with water.
Remarks
Supply Locations
FILM Cleaner (TR-TA) Blue manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of FILM Cleaner (TR-TA) Blue at a competitive price from us. We have ready stock of FILM Cleaner (TR-TA) Blue in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.