Electro Cleaner Electrical Parts Cleaner
For the latest, most accurate MSDS, email us at office@rx-sol.com.
Excellent Cleaner for Electric Parts
Electrocleaner
A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Cleaning Degreasing and rust removal from electrical equipment.It provides immediate and efficient removal with a high evaporation rate.
Electrocleaner is a specially formulated cleaning and degreasing agent designed for the maintenance of electrical and electromechanical equipment. It combines high-performance non-chlorinated solvents with selected cleaning agents to provide rapid removal of oil, grease, and accumulated contaminants.
The product penetrates and loosens oily deposits, helping restore clean surfaces on suitable electrical components. Its fast-evaporating solvent system minimizes residual solvent after application, reducing the need for manual wiping on accessible surfaces.
Electrocleaner is suitable for use in industrial maintenance workshops, electrical service facilities, marine applications, and equipment maintenance operations.
Key facts
- Product
- Electro Cleaner Electrical Parts Cleaner
- Part No.
- RXSOL-16-1093-025
- Category
- Electrical Cleaners
- Also known as
- EL-SOL, SK-182, GP CLEANER AND DEGREASER FOR ALL ELECTRICAL PARTS, SEA SHIELD ELECTROCLEAN 79100
- Brand
- RXSOL · Chemical Pioneers since 1995
- Supply
- From stock in Oman, UAE and India; to vessels in Gulf and Indian ports
- Documents
- MSDS (PDF); TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 7733 3599
| Product Properties | ||
| Appearance | Clear Colourless Liquid | Vapor Density : Heavier than air |
| Flash Point | 63°C (Closed Cup) | Stabilit Very stable understandard normal conditions |
| Compatibility | ||
|
Metal |
No known effect |
Note: After use the product must always be well sealed in the drum. |
| Packaging | Order No | Size (in kgs./lts.) |
| RXSOL-16-1093-025 | 7/25 Lts | |
RXSOL-16-1093-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1093-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1093-025. Never use RXSOL-16-1093-025 on a running generator or motor. RXSOL-16-1093-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
Where to use ELECTROCLEANER Electrical Parts Cleaner?
- Cleaning suitable motor housings, metal parts, and accessible components during maintenance.
- Removal of oil and dirt from compatible, isolated electrical equipment.
- Cleaning suitable connectors, terminals, relays, and other components after compatibility testing.
- Degreasing suitable electrical and electromechanical parts in ship engine rooms, workshops, and industrial facilities.
Dosage
Never use RXSOL-16-1093-025 on a running generator or motor.
Never Dilute RXSOL-16-1093-025 with other solvent.
For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment.
Small Parts and components may be cleaned by DIP BATH of RXSOL-16-1093-025
How to clean Electrical Parts easily- remove GREASE, DIRT easily from ELECTRICAL PART?
- Switch off and isolate equipment. Disconnect the power supply, follow lockout/tagout procedures, and verify that the equipment is de-energized.
- Inspect the component. Identify the contaminants and check the compatibility of the cleaner with insulation, plastics, rubber, coatings, and other materials.
- Apply Electrocleaner. Spray or apply a controlled quantity directly onto the contaminated surface using suitable application equipment.
- Allow cleaning action. Let the solvent dissolve and loosen the oil and grease. Use a soft, compatible brush where necessary.
- Remove contamination. Allow loosened contaminants to drain or wipe them away using a clean, lint-free cloth. Avoid spreading dissolved contaminants into sensitive components.
- Allow complete drying. Ensure all solvent has evaporated and fumes have been adequately ventilated before restoring power.
- Inspect before operation. Confirm that the component is clean, dry, and free from residue before returning it to service.
Notes
Characteristics
- High dissolving and penetration action.
- Excellent degreasing and emulsification power .
- Safe on applied electrical insulation.
- Non-corrosive .It is safe to use on painted or varnished metal surfaces.
- Without chlorinated solvents.
- To be used as an alternative to conventional electric cleaners
Precautions
Why to use RXSOL ElectroCleaner Electrical Parts Cleaner?
RXSOL ElectroCleaner is an extremely useful alternative for cleaning of electrical parts rather than using hazardous and toxic chemicals.
- Powerful Degreasing Action: Quickly dissolves oil, grease, and oily deposits from suitable electrical components.
- Fast Evaporation: Helps reduce drying time and minimizes downtime during maintenance.
- Non-Chlorinated Formulation: Formulated without chlorinated degreasing solvents.
- Effective Contaminant Removal: Helps remove dirt, oil, and maintenance-related residues.
- Low-Residue Cleaning: Designed to leave minimal solvent residue when used as directed; residue-free performance must be verified.
- Convenient Application: Suitable for spray or controlled application on accessible electrical components.
Supply location
GP CLEANER AND DEGREASER FOR ALL ELECTRICAL SPARE PARTS ELECTROCLEANER Electrosol manufacturer and supplier in India, UAE Middel East, Kenya Africa.
Electrocleaner Electrical Parts cleaner supplier in Mumbai, Kandla Gandhidham, Chennai Ennore, Vizag Gangavaram, Kolkata Haldia, Paradip, Dubai Sharjah, Ajman, Abudhabi, Fujairah, Muscat Oman, Barka, Nairobi Kenya Africa, Canada