Drain Pipe Sewer Cleaner
MSDS not yet available online for this product — email us at office@rx-sol.com and we'll send you a copy.
Heavy DUTY and fast effective Descaler for any type of metal (except for soft metal like aluminium and zinc). This scales remover for sewage pipe lines and evac systems . It contains special inhibitors to make its after on most metals, concrete and plastic surfaces. Drain Blaster cuts down the need to plumb or rod, or excavate when the build-ups occur.
OTHER NAME : BLOCKED PIPE CLEANER, PIPE-CLEAN, DRAIN PIPE CLEANER
Key facts
- Product
- Drain Pipe Sewer Cleaner
- Part No.
- RXSOL-16-1057-001
- Category
- Floor Care
- Brand
- RXSOL · Chemical Pioneers since 1995
- Supply
- From stock in Oman, UAE and India; to vessels in Gulf and Indian ports
- Documents
- MSDS and TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 7733 3599
Application:
- Remove excess water from blocked kitchen sink, wash basin or tub.
- Pour the content into the blocked sink.
- Add a cup of water and leave for approximately 30min.
- Flush well with water.
- Repeat application for stubborn blocks.
Features:
- Clears clogged drains
- Melts grease and hair
- Keeps drain germs free
Dosage
A plumbing detergent designed to dissolve clogs pipes. Dissolves everything except glass or metal without damaging the piping.
Directions for Use and Dose Rates :-
The most effective method is circulation for large systems or components likeboilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of Drain Scale Remover in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with RXSOL OB 1005.
Drain Scale Remover should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling.
After using Drain Scale Remover it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alakleen Liquid or Liquid Soap in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces. Drain Scale Remover should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used.
Remarks
Supply Locations
We have ready stock of our products for our regular customers at our warehouses in Mumbai, Kandla, Vizag, Ennore, Kolkata, and all over the Middle East.
Click here to view our stockpoints.