Degresol High Flash Point Degreaser
For the latest, most accurate MSDS, email us at office@rx-sol.com.
RXSOL-16-1009-020 is a well balanced blend of non aromatic hydrocarbons degresol ( having super degreasing power ) with non polar degreasing surfactant effects. Its balanced evaporation rate enables it to be used for cleaning and degreasing of electrical equipment, motor winding machine coolant from machined parts, castings, panels and electrical/electronic components etc. classified as non flammable, flash point 62°C.
Designed to provide a versatile degreasing solution for all manufacturing, maintenance, inspection and surface preparation needs
Safe high flash point odourless degreaser Best substitute of hazardous solvents
Appropriate solution for use on even the most sensitive metals and plastics and in critical applications as well as for general oil and grease removal.
Key facts
- Product
- Degresol High Flash Point Degreaser
- Part No.
- RXSOL-16-1009-020
- Category
- Degreasers
- Also known as
- XCELL53 COLD, Electroclean A Quick Dry, Electrosolve E, arma clean Electrical contact cleaner, Lotoxane
- Brand
- RXSOL · Chemical Pioneers since 1995
- Supply
- From stock in Oman, UAE and India; to vessels in Gulf and Indian ports
- Documents
- MSDS (PDF); TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 7733 3599
Product Properties:
| Appearanc | Clear Colourless Liquid | Low Evaporation Rate |
| Flash Point | 63°C (Closed Cup) |
Stability : Very stable understandard, normal conditions |
| Odour | Almost odourless | Easy to handle at work station |
| SOLUBILITY | Insoluble in water | Soluble in Solvent |
| Compatibility | ||
| Metal Plastic Rubber |
No known effect No Known effect May swell |
Note: After use the product must always be well sealed in the drum. |
| Packaging | Order No.: | Size (in kgs./lts.) |
| RXSOL-16-1009-020 |
7/25 Lts |
- High dissolving and penetration action with minimum residual effect.
- Excellent degreasing power .Removal of oils, greases, machining fluids, hydraulic fluids, and hydrocarbon-based protective coatings in manufacturing processes.
- Safe on applied electrical insulation.
- Non-corrosive .It is safe to use on painted or varnished metal surfaces also Excellent compatibility with metals and most plastics.
- Without chlorinated solvents.
- Suitable for De-watering following aqueous processing. Application RXSOL-16-1009-020 to wet surfaces will replace unwanted water from components and electrical systems.
- To be used as an alternative to conventional electric cleaners Cleaning electrical and electronic equipment.
- Low odour and controlled evaporation reduce exposure in the workplace.
- Suitable for use in ultrasonic cleaning systems.
- Degreasing of machinery, components and assemblies during maintenance and repair.
- Final cleaning prior to welding, painting, bonding or coating.
Dosage
It must be applied concentrated . May be applied to the surface by brush or spray, agitate stubborn deposits if required with a brush and wipe away residues with clean cloth.
RXSOL-16-1009-020 can also be use in dip tank applications.
Heavily soiled components may require agitation with a brush.
RXSOL-16-1009-020 preferably use in open or sufficiently ventilated areas. RXSOL-16-1009-020should always be used concentrate (without mixing with other solvent.)
For best results apply with either by brush, swab,or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1009-020. Never use RXSOL-16-1009-020 on a running generator or motor. RXSOL-16-1009-020 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic. Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
For optimum performance in ultrasonic cleaning systems a frequency of 25 kHz is recommended. Due to the self-heating ability of such systems a temperature control should be installed on the machine to ensure operating temperature remains below 40°C. Whilst components may be allowed to air dry naturally drying times can be reduced by wiping away excess material with a cloth or by employing forced air drying techniques.
Notes
CLASSIFICATION :
*ELECTROSOL QD (quick dry )
*ELECTROSOL NF (Non-flammable )
*ELECTROSOL PLUS APPLICATION : For cleaning of electrical parts .
Precautions
Keep away from heat, sparks and open flame. Provide good ventilation. Avoid contact with eyes. STORAGE PRECAUTIONS Store at moderate temperatures in dry, well-ventilated area. Keep away from heat, sparks and open flame.
Supply location
Degresol High Flash Point Degreaser manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Degresol High Flash Point Degreaser at a competitive price from us. We have ready stock of Degresol High Flash Point Degreaser in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Keywords
We are marine service ship chemical supplier located at all Indian and Middle East port. Our company is specialised in the field of marine chemicals - tank cleaner, hold block cleaning chemicals, Engine stores chemicals – Deck store maintenance chemicals – electric store cleaning chemicals etc. Now we have various marine store in Indis and UAE.
We offer very good discounted price for our registered customer.
We cover ship chemicals and oil rigs chemicals supply at KANDLA - GANDHIDHAM, Mundra, Mumbai - JNPT, Dahej - Surat, Manglore, Goa, Visakhapatnam - VIZAG, Gangavaram, Kakinada, Chennai - Ennore, Kolkata, Haldia, Buz buz, Paradip, Dubai, Sharjah, Abu Dhabi, Fujairah.
We supply on vessel.
We can deliver all ship maintenance chemicals to vessel at any of Indian port and Middle East port.
Supply all cleaning chemicals oils grease cleaning chemicals, sludge cleaning chemicals etc.
For any quotation in Indian port UAE port please not hesitate to send us your email.