Bilge Water Flocculant
For the latest, most accurate MSDS, email us at office@rx-sol.com.
Bilge Water Flocculant (Part No. RXSOL-40-4096-025) is supplied by RXSOL as part of our Engine Room Cleaners range. Supplied from RXSOL stock in Oman, the UAE and India, and to vessels in Gulf and Indian ports. Contact us for price, pack size, lead time, MSDS and technical data sheet.
Bilge Water Flocculant is a very effective liquid treatment based on Poly chloride to separate oil residues from bilge water. It is iron-free, and is completely safe to the environment.
Key facts
- Product
- Bilge Water Flocculant
- Part No.
- RXSOL-40-4096-025
- Category
- Engine Room Cleaners
- Brand
- RXSOL · Chemical Pioneers since 1995
- Supply
- From stock in Oman, UAE and India; to vessels in Gulf and Indian ports
- Documents
- MSDS (PDF); TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 7733 3599
Form Liquid
Appearance Clear
Density 1,3
pH, in conc. 1,3
Not Compatible Corrosive to cast iron as concentrate. Non-corrosive to all metals at use concentration.
International environmental regulations set strict rules as to the oil content in effluent water from ships. To meet these regulations, a combination of mechanical and chemical cleaning is necessary. Bilge Water Flocculant is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.
Dosage
Dosing method
Typical dose rate: 100 - 500ppm (0.1 - 0.5 litre/m3 of water) In a multistage bilge water cleaning system, Bilge Water Flocculant is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation and normally needs no alteration. If required, dosing can also be controlled by measuring the level in the container.
Notes
Features
- Cost-effective bilge water treatment based on specially selected Poly Aluminium Chloride
- Iron-free. Completely safe to the environment
- Acts by both breaking the oil-in-water emulsion and by building flocs
- Helps to meet environmental regulations on oil content. Discharged water contains normally less than 3 ppm oil
- Remaining oil sludge can be burned onboard or pumped ashore-contains very little water
- Low dosage, economical use
- Effective over an extended pH-range. Eliminates the use of pH-stabilising chemicals
- Approved by manufacturers of bilge water cleaning systems
Supply location
Bilge Water Flocculant manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Bilge Water Flocculant at a competitive price from us. We have ready stock of Bilge Water Flocculant in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.